9/16 as a decimal
9/16 = 0.5625 inches = 14.2875 mm.
0.5625
9/16 of an inch
Millimetres
14.2875 mm
Centimetres
1.42875 cm
Percent
56.25%
Decimal
terminates
16 goes into 9 0 times with 9 left over, so write 0 and a decimal point. Then bring down a zero and divide again, one digit at a time.
| Step | Divide | Digit | Subtract | Remainder |
|---|---|---|---|---|
| 1 | 90 ÷ 16 | 5 | 90 − 80 | 10 |
| 2 | 100 ÷ 16 | 6 | 100 − 96 | 4 |
| 3 | 40 ÷ 16 | 2 | 40 − 32 | 8 |
| 4 | 80 ÷ 16 | 5 | 80 − 80 | 0 |
Remainder 0: nothing is left to divide, so the division stops and 9/16 = 0.5625 exactly.
Where 9/16 falls at each precision, and whether the mark is the value exactly
| Rule | Nearest mark | Exact? |
|---|---|---|
| 1/16 | 9/16 | exact |
| 1/32 | 9/16 | exact |
| 1/64 | 9/16 | exact |
9/16 = 18/32 = 36/64
All the same mark. 9/16 is the form in lowest terms, which is how a rule labels it and how a cut list should read.
Mixed numbers with 9/16
A whole number of inches plus 9/16: the whole number goes in front of the decimal point and 9/16 supplies the digits after it
| Mixed | Inches | mm |
|---|---|---|
| 1 9/16 | 1.5625 | 39.6875 |
| 2 9/16 | 2.5625 | 65.0875 |
| 3 9/16 | 3.5625 | 90.4875 |
| 4 9/16 | 4.5625 | 115.8875 |
| 5 9/16 | 5.5625 | 141.2875 |
| 6 9/16 | 6.5625 | 166.6875 |
| 7 9/16 | 7.5625 | 192.0875 |
| 8 9/16 | 8.5625 | 217.4875 |
| 9 9/16 | 9.5625 | 242.8875 |
| 10 9/16 | 10.5625 | 268.2875 |
| 11 9/16 | 11.5625 | 293.6875 |
| 12 9/16 | 12.5625 | 319.0875 |
Converting 9/16 to a decimal
A fraction is a division. 9/16 = 9 ÷ 16 = 0.5625. The decimal terminates because 16 factors into 2 × 2 × 2 × 2 — only 2s and 5s, the factors of ten. Any fraction whose denominator is built from those has an exact decimal.
In metric that is 14.2875 millimetres (1.42875 cm), since one inch is exactly 25.4 mm. As a percentage of an inch it is 56.25%.
9/16 is a real mark on a rule: it is the 9/16 mark on a 1/16 rule, and the same mark is written 18/32 or 36/64 at finer precisions.
Going the other way
To turn 0.5625 back into a fraction, pick the precision you are working to and multiply. At 1/16: 0.5625 × 16 = 9, giving 9/16 exactly. At 1/32: 0.5625 × 32 = 18, giving 9/16 exactly. At 1/64: 0.5625 × 64 = 36, giving 9/16 exactly.
What is 9/16 as a decimal?
9/16 as a decimal is 0.5625. Divide the numerator by the denominator: 9 ÷ 16 = 0.5625. The division comes out exactly, with no remainder left over.
What is 2 9/16 as a decimal?
2 9/16 as a decimal is 2.5625. The whole number stays in front of the decimal point and 9/16 supplies the digits after it, so 2 9/16 = 2 + 0.5625. In millimetres that is 65.0875 mm. This page's mixed-numbers table runs from 1 9/16 to 12 9/16.
What is 9/16 as a percent?
9/16 as a percent is 56.25%. Multiply the decimal by 100: 0.5625 × 100 = 56.25%.
What is 0.5625 as a fraction?
0.5625 as a fraction is 9/16, in lowest terms. It can also be written 18/32 or 36/64, which are the same value expressed over a larger denominator.
How many millimetres is 9/16 of an inch?
9/16 of an inch is 14.2875 mm, or 1.42875 cm. An inch has been defined as exactly 25.4 mm since 1959, so this conversion is a definition rather than a measurement — the millimetre value is exact too.
Where is 9/16 on a tape measure?
9/16 is a real mark on a rule: it is the 9/16 mark on a 1/16 rule, and the same mark is written 18/32 or 36/64 at finer precisions.